Flush Retrofit Kit

Type of product is a kind of use is very convenient, are used in a lot of toilet, and if you want to buy solid product, know more about something solid work principle and product installation, consult for everybody to understand, certainly can With very good flushing effect, improve the hygiene of toilets.Product leakage how to fix up float arm, if the water stop, floating ball can't mentioned a certain height, valve plunger into the floating ball valve, probably because floating ball of tank wall and, in this kind of circumstance, can have a brief will be Floating arms bent, from floating ball tank wall. If the floating ball didn't come into contact with the water tank, floating in my hand is out of control arm, will float counterclockwise rotation, slowly put it down, then shake floating ball, look to Flush valve price whether the water, water is too much, can make the ball To rise, if there is water, you need to water out, and then install it to in situ. If the float is impaired or from corrosion, just need to get a new one, if there is no water in the floating ball, gently bending float rod, bring it down to the most Low position, make the float ball to prevent the new water into water tank.
The toilet wall, but how to flush weakness? Toilet loose compressive bar at present most is according to the type of flush toilet, toilet water tank cover have a key, the key is on the back of the push rod, can adjust Flush Retrofit Kit the length of the lever, when adjusting the length of the lever, the greater the pressure adjustment The smaller the stem the amount of water. In addition, the pressure is threaded rod, in the process of long-term use may loose, decrease in length. In this case, when we press the button, the toilet is not blocked, just because the valve drive too small, the water change Therefore, water has weakened.
If this way is invalid, must adhere to the product under the seat in the tank the ball plug, is likely to be caused by the residue in the water ball unable to move to the right place, or the ball has been damaged, leakage of water from the Concealed Flush Valve place where product opening to the next The bucket cylinder. Toilet water valve closed can be closed at this moment, and then began to flush, you need to the water in the tank emptied. If it is water tank ball plug appear wear away, suggest to install a.
Install a product pipeline connected to the toilet, at the time of installation to be where the nozzle and a sealing rubber ring, when installation should pay attention to don't dispatch inlet to outlet. When installing a water pipe Flushometer valve top cover on strong technical strength combined with aprons, oblique The aprons mouth up.